What is a Cellular Network 3G 4G Wifi Antenna Combo Antenna?
The Cellular Network 3G 4G Wifi Antenna Combo Antenna CTRF-ANTENNA-EX-24-70-4615-SMA-1M is a MIMO antenna high-gain 5dBi outdoor dual SMA male antenna with multi-band cellular GSM 3G 4G LTE, and Wifi antenna 2×2 MIMO combo antenna manufactured by C&T RF Antennas Inc for IoT & M2M applications.
This Cellular Network 3G 4G Wifi Antenna Combo Antenna dome antenna comes with a 46x15mm IP67-rated waterproof antenna radome, SMA connector, and RG 174 cable, the frequency can be charged to GPS + Wifi combination antenna, GPS +4G combination antenna, GPS +wifi combination antenna for your choice.
What are the considerations for IoT devices?
Due to power and size limitations, IoT nodes often use simple coin cell batteries or small energy storage devices to extend their lifespan (about several years).
For this reason, low-energy protocols with different “levels” and/or power modes” must be used to achieve different levels of savings. energy.
For example, LoRa devices with multiple current modes (i.e. transmit, receive, synthesizer, standby, idle, and sleep) can enable sensors to last longer and thus reduce maintenance. The sensors have a longer lifetime, thus reducing maintenance.
The frequency of the uplink and downlink is particularly relevant for saving battery power. Scheduled uplinks and downlinks enable low latency, high throughput, and high reliability, while asynchronous, ad-hoc transmissions can extend range and battery life by sacrificing data rate and payload size.
IoT devices often utilize a wide range of energy harvesting techniques to achieve a relatively unlimited battery life without human intervention. However, this increases the cost and complexity of the node.
Regardless of the industry, IoT devices typically leverage a wide variety of cellular, Bluetooth, and Wi-Fi protocols to integrate and scale with local monitoring systems.
Multi-protocol IoT platforms typically include more niche IoT protocols (e.g., ZigBee, LoRa, Sigfox, etc.) as well as low-power Bluetooth (BLE), Wi-Fi, or cellular modules to combine the benefits of both into one. Devices utilizing Wi-Fi are more easily connected to the cloud, allowing control/configuration and firmware upgrades from any remote location.
Nodes that include BLE and sub-GHz low-power WAN solutions can provide Bluetooth beacons for real-time location systems, while also allowing remote control of simple mechanisms such as industrial lighting.
Nevertheless, the main factors to consider for Bluetooth and cellular devices are testing and certification. Both protocols need to be extensively tested and proven before they can be approved and released.
The Cellular Network 3G 4G Wifi Antenna Combo Antenna is manufactured by C&T RF Antennas Inc, the combo antenna IP67-rated waterproof antenna through-hole screw mount antennas manufacturer in China.
We provide many antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antenna, Yagi Antenna, etc.
C&T RF Antennas Inc provides the RF antenna with many antenna frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.
We provide single-band antennas, dual-band antennas, tri-band antennas, and multi-band antennas.
Contact us for more details on the Cellular Network 3G 4G Wifi Antenna Combo Antenna such as Cellular Network 3G 4G Wifi Antenna Combo Antenna datasheet, Cellular Network 3G 4G Wifi Antenna Combo Antenna pricing, Cellular Network 3G 4G Wifi Antenna Combo Antenna inventory, or other combination antenna styles.
Cellular Network 3G 4G Wifi Antenna Combo Antenna Dome Antenna specifications:
Cellular Network 3G 4G Wifi Antenna Combo Antenna Dome Antenna Electrical Specifications | |
RF Antenna Type | Combination Antenna |
Model | CTRF-ANTENNA-EX-24-70-4615-SMA-1M |
Frequency | 2400-2500MHz, 698-2700MHz |
Gain | 5dBi; 5dBi |
VSWR | ≤2.0 |
Impedance | 50 Ω |
Polarization | Vertical |
Cable Type | RG174 |
Connector | SMA Male |
Cable Length | 1 Meter |
Max Power | 50W |
Lightning Protection | DC-Ground |
Cellular Network 3G 4G Wifi Antenna Combo Antenna Dome Antenna Mechanical Specifications | |
Dimension | 46×14.5mm |
Weight | Approx. 30g |
Radome Material | Plastic ABS |
Operation Temperature | -40˚C~+85˚C |
Storage Temperature | -40˚C~+80˚C |
Finished Antenna Color | Black |
Antenna Design | Dipole Array |
Mounting | Screw |
Safety Emission and other | RoHS Compliant |
Applications | ISM/SCADA/Utilities, IoT/NB-IoT/LoRa, WIFI/Bluetooth/BLE/BT/Sigfox/Zigbee, 3G/UMTS/GSM, 4G LTE/LTE-IoT/Cat-M, etc |
Cellular Network 3G 4G Wifi Antenna Combo Antenna Details’ Pictures
IPEX connector or Fakra connector is also choosable.
Cellular Network 3G 4G Wifi Antenna Combo Antenna Dome Antenna Features
Reviews
There are no reviews yet.