Name: High-gain 5dBi 4G NB-IoT Band Embedded PCB Antenna Manufacturer - C&T RF Antennas Manufacturer
SKU: CTRF-ANTENNA-PCB-7027-6016-UFL

What is a High-gain 5dBi 4G NB-IoT Band Embedded PCB Antenna?

The High-gain 5dBi 4G NB-IoT Band Embedded PCB Antenna CTRF-ANTENNA-PCB-7027-6016-UFL antenna is a 5 dBi high-gain 4G NB-IoT PCB Antenna indoor antenna manufactured by C&T RF Antennas Inc for GSM UMTS NBIoT LTE 4G wireless network applications.

The High-gain 5dBi 4G NB-IoT Band Embedded PCB Antenna has a 60x16mm printed circuit board size, a 5dBi high-gain, and an Ipex/u.FL connector, a 100mm length RG 1.13 antenna extender cable, adhesive sticker easy mount connection for 4G NB-IoT bands applications.

Can I use an NB-IoT antenna for a 4G module antenna?

Yes, the 4G module and NBIOT are one kind of module.

4G advantages: High-speed data rate, broadband transmission, support for instant wireless communication, mature technology and high compatibility.

The advantages of NB-IoT are narrowband data transmission, a more comprehensive coverage area, support for massive device access, and deficient power consumption.

Does NB-IoT communicate through 3G,4G or 5G base stations? Or does it exist independently of these standards?

NB-IOT started with 4G and only operated on FDD. Now that NB-IoT has been integrated into the 5G system, the subsequent evolution can also communicate through 5G base stations.

Technically, it exists independently of these standards.

The biggest difference between the NB systems is generally the lower layer, and the wireless is more specific up to RRC/NAS signalling is about the same.

The lower layer protocol of NB is different from 3G/4G/5G. The current network deployment is generally in the low-frequency band. This can meet the wide coverage requirements of IoT.

In terms of equipment, it will generally work with low-frequency band sites. The working frequency band determines that only with this standard RRU / antenna. At present, it should be with 4G FDD low-frequency standard equipment.

GSM equipment is too old to support 4G FDD when it is replaced with NB support. So the system is independent. The current network is generally co-located with 4G FDD low frequency.

The base station is the base station, the system is the system.

C&T RF Antennas Inc, the Internet Of Things & Machine To Machine Internal Antenna & External Antenna manufacturer in China, manufactures the High-gain 5dBi 4G NB-IoT Band Embedded PCB Antenna.

C&T RF Antennas Inc provides antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antennas, Yagi antennas, etc.

C&T RF Antennas Inc provides the internal-external IoT & M2M antenna with many radio frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.

C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.

Contact us for details on the High-gain 5dBi 4G NB-IoT Band Embedded PCB Antenna, such as the 4G NB-IoT PCB Antenna datasheet, 4G NB-IoT PCB Antenna pricing, 4G NB-IoT PCB Antenna inventory, etc.

Or the other internal & external 4G NB-IoT Antenna types.