Name: High-performance 4G NB-IoT PCB Antenna 2dBi Ipex Antenna Manufacturer - C&T RF Antennas Manufacturer
SKU: CTRF-ANTENNA-PCB-7027-3508-UFL

What is a High-performance 4G NB-IoT PCB Antenna 2dBi Ipex Antenna?

The High-performance 4G NB-IoT PCB Antenna 2dBi Ipex CTRF-ANTENNA-PCB-7027-3508-UFL antenna is an indoor 4G LTE Cat M NB-IoT antenna designed PCB antenna manufactured by C&T RF Antennas Inc for 4G LTE Cat-M1 & LTE Cat-NB1 applications.

The High-performance 4G NB-IoT PCB Antenna 2dBi Ipex Antenna has a 698-960MHz, 1710-2700MHz covering 2G 3G 4G GSM UMTS LTE Cat M1 & NB-IoT band for IoT devices.

The High-performance 4G NB-IoT PCB Antenna 2dBi Ipex Antenna comes with a small PCB size of 35x8mm, normal 2dBi gain, Ipex connector, and 100mm length RG 1.13 cable for 4G LTE connectivity, the GSM UMTS LTE CAT M1, and LTE Cat-NB1.

What is the relation between 4G and NB-IoT?

The more compatible 4G technology has been commercially available for several years. It is mature and stable enough to interconnect with almost any network, and most terminal devices can access 4G communication networks.

NB-IoT operates in a very narrow spectrum, consuming only about 180 Hz. Although it is an emerging communication technology, it is fully compatible with GSM, UMTS, and 4G networks.

In other words, it can be built on existing communication platforms without hardware upgrades, making it easy and fast to apply;

Massive device access: With the ability to support massive connections, NB-IoT can support more than 100,000 connections per sector and supports low latency sensitivity, ultra-low device cost, low device power consumption, and optimized network architecture.

Extremely low power consumption: With lower power consumption in similar technologies, the standby time of NB-IoT terminal modules can be up to several years or even theoretically able to reach more than a decade.

Relying on the existing 4G network, the NB-IoT is widely used in Internet of Things scenarios such as smart meters, smart homes, smart Parking, wearable devices, asset tracking, and smart cities.

C&T RF Antennas Inc, the NB-IoT Internal Antenna & NB-IoT External Antenna manufacturer in China, manufactures the High-performance 4G NB-IoT PCB Antenna 2dBi Ipex Antenna.

C&T RF Antennas Inc provides antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antennas, Yagi antennas, etc.

C&T RF Antennas Inc provides the internal-external antenna with many radio frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.

C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.

Contact us for details on the High-performance 4G NB-IoT PCB Antenna 2dBi Ipex Antenna, such as the internal PCB antenna datasheet, internal PCB antenna pricing, internal PCB antenna inventory, etc.

Or the other internal & external NB-IoT antenna types.