What is a High-performance 4G LTE Cat M1 Antenna?
The High-performance 3dBi SMA Antenna Cat M1 Antenna rubber duck antenna style CTRF-ANTENNA-AP-8221-13158-SMA antenna item is an LTE Cat M1 Antenna manufactured by C&T RF Antennas Inc. The 13x158mm plastic housing omnidirectional portable antenna Cat M1 antenna is designed for IoT and M2M applications.
What is Cat M1?
As a founder of LTE, the 3GPP organization has always used the Internet of Things as an important evolution direction of LTE.
As early as 2008, the first version of R8 (Release 8) of the LTE, in addition to the terminal level of Cat.3, Cat.4, and Cat.5, which satisfy broadband multimedia applications, there is only 5Mbit/s. The terminal level CAT.1, can be used for “low rate” applications such as foundations.
Notice! The CAT here is not the meaning of the cat, which is the meaning of Category, “type, classification”. Cat. x is that UE-CATEGORY and the UE is a user equipment. Cat.x This value is used to measure the wireless performance of user terminal devices, which is used to divide the terminal rate (level).
Different CATs, different rates
At the beginning of the development of LTE, Cat.1 did not be concern by the industry. As wearable equipment is gradually popular, Cat.1 is gradually attached to the industry.
However, Cat.1 terminals need to use 2 antennas, which still “require too high” for wearable equipment with extremely high volume sensitivity (generally equipped with one antenna).
Therefore, in R12 / R13, 3GPP has been optimized for the Internet of Things.
The first is to increase the new terminal grade Cat.0 in R12, and give up support for MIMO (multi-antenna), simplifying half-duplex, peak rate is reduced to 1 Mbit / s, and the complexity of the terminal is reduced to 40% of the ordinary LTE terminal. . In this way, the cost requirements of the Internet of Things were initially reached.
However, although the channel bandwidth of the Cat.0 terminal drops to 1.4 MHz, the radio frequency reception bandwidth is still 20 MHz (too large).
Thus, 3GPP adds a Cat.M1 level in R13, the channel bandwidth and the radio frequency receiving bandwidth is 1.4 MHz, and the complexity of the terminal is further reduced.
Cat.m1 is eMTC. This is the source of eMTC.
The High-performance Cat M1 Antenna 3dBi SMA Antenna Rubber Ducky Antenna is supplied by C&T RF Antennas Inc, a professional antenna manufacturer in China, we provide the Cat M antenna with many antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antennas, Yagi antennas, etc.
C&T RF Antennas Inc provides the internal-external antenna with many radio frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.
C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas such as 3in1 combination antennas 4G/GPS/Wifi antennas, 2in1 4G/GPS antennas, GSM/GPS antennas, 4G/Wifi antennas, GPS/Wifi antennas, etc. for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.
The High-performance Cat M1 Antenna 3dBi SMA Antenna rubber duck antenna has a white color or a black color choosable.
Contact us for more High-performance Cat M1 Antenna 3dBi SMA Antenna Rubber Duck Antenna details such as High-performance Cat M1 Antenna 3dBi SMA Antenna datasheet, High-performance Cat M1 Antenna 3dBi SMA Antenna pricing, High-performance Cat M1 Antenna 3dBi SMA Antenna inventory, or other Cat M antenna styles.
High-performance Cat M1 Antenna 3dBi SMA Antenna Specifications
High-performance Cat M1 Antenna 3dBi SMA Antenna Electrical Specifications | |
RF Antenna Type | Rubber Duck Antenna |
Model | CTRF-ANTENNA-AP-8221-13158-SMA |
Frequency Center | 824-960MHz; 1710-2170MHz |
Gain | 3dBi |
VSWR | ≤2.0 |
Impedance | 50 Ω |
Polarization | Verticle |
Directional | Omnidirectional |
Connector | SMA Male |
Max Power | 50W |
Lightning Protection | DC-Ground |
High-performance Cat M1 Antenna 3dBi SMA Antenna Mechanical Specifications | |
Dimension | 13*158mm |
Weight | Approx. 10g |
Radome Material | Plastic ABS |
Operation Temperature | -20˚C ~ +80˚C |
Storage Temperature | -40˚C ~ +85˚C |
Color | Black |
Antenna Design | Dipole Array |
Mounting | SMA Connector |
SafetyEmission and other | RoHS Compliant |
Applications | ISM/SCADA/Utilities, IoT/NB-IoT/LoRa, LTE-M/Cat-M, 2G/3G/GSM |
High-performance Cat M1 Antenna 3dBi SMA Antenna Rubber Duck Antenna Features
Reviews
There are no reviews yet.