Name: High-performance Indoor LTE Antenna 4G PCB Antenna - C&T RF Antennas Manufacturer
SKU: CTRF-ANTENNA-PCB-7027-13508-IPEX

Who makes a High-performance Indoor LTE Antenna 4G PCB Antenna?

The high-performance Indoor LTE Antenna 4G PCB trace board antenna CTRF-ANTENNA-PCB-7027-13508-IPEX antenna model is a Lora, NB-IoT, GSM Cellular 3G 4G LTE antenna with 800/1800/2600 MHz bands for LTE 4G terminals, LTE 4G smart devices manufactured by C&T RF Antennas Inc.

The High-performance Indoor LTE Antenna 4G PCB Antenna comes with a 138x8mm narrow PCB circuit board, 6/8dBi high-gain LTE antenna indoor, Ipex/Ipx/MFH/U.FL connector antenna, self-adhesive mount, 120mm RG 1.13 cable antenna extension, embedded PCB antenna.

What are the antenna board layout requirements?

Some general design principles need to be considered to achieve maximum benefit through the low profile and potential space savings. For monopole antennas, adequate grounding elements are critical; good quality/larger grounding elements improve VSWR and correlate closely with theoretical antenna behavior.

For planar antennas integrated into a modular board, the forbidden area around the antenna requires the board to be free of copper alignment or ground filler. In multilayer designs, through holes along the edge of the forbidden area are required to connect grounding elements.

Antenna tuning or minor adjustments to alignment dimensions or conductive arm lengths must be made inside the enclosure rather than in free space because the enclosure and its operating environment affect its radiation performance.
In addition, changes in layout often result in changes in antenna performance and must therefore be tested.

Antennas with thicker alignment widths tend to have wider bandwidths, as in the case of structures such as tapered dipole antennas.

In addition to the thickness and length of the conductive element’s alignment, the relative dielectric constant (E) and the thickness of the substrate material (e.g., FR4, flexible PCB (FPCB), and Teflon) can also affect antenna performance.

The High-performance Indoor LTE Antenna 4G PCB Antenna is provided by C&T RF Antennas Inc, the RF antenna manufacturer in China, we provide many antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antenna, Yagi Antenna, etc.

C&T RF Antennas Inc provides the RF antenna with many antenna frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.

The Indoor 4G LTE Antenna PCB dipole design antenna is manufactured by C&T RF Antennas Inc, the Indoor LTE Antenna and outdoor 4G LTE Antenna manufacturer in China, contact us for the datasheet, pricing, and inventory of the Indoor 4G LTE Antenna with PCB/FPCB antenna types.