No.51 of Xida Rd

Changan, Dongguan, 523863

+86 134 1223 9096

24/7 Customer Support

Mon - Sat: 9:00 - 18:30

Online support always open

This product is Amazing

LoRa Directional Antenna 10M Yagi Antenna

C&T RF Antennas Inc - 10 Meter Yagi Antenna 915MHz Directional Antenna Lora Directional Antenna 10M Yagi Antenna Manufactory

10M Yagi Antenna Lora Manufacturer

C&T RF Antennas Inc is the LoRa Directional Antenna 10M Yagi Antenna manufacturer, we provide RF antennas with other antenna types or other antenna frequencies.

Contact the C&T RF sales team for more LoRa Directional Antenna 10M Yagi Antenna details.

What is a LoRa Directional Antenna 10M Yagi Antenna?

The LoRa Directional Antenna 10M Yagi Antenna style CTRF-ANTENNA-YAGI-8096-5819-NK-10M antenna is an 800-960 MHz directional antenna 11 dBi High-gain antenna 7 element Yagi antenna with 10meters cable antenna manufactured by C&T RF Antennas Inc for GSM/LoRa/LoRaWan applications.

How to make a Yagi antenna mediation?

Because the pilot array on the gain, backward radiation, input impedance, etc. have an impact, so try mediation is a necessary step before the Yagi antenna is put into use.

When debugging, pay attention to the antenna must be set up, apart from the ground height of two, or three meters above, so as not to affect the antenna impedance and elevation angle.

When setting up the yagi antenna, the antenna plane of the oscillator address can be both parallel and vertical, as long as the antenna and the transmitting end keep the communication polarization method, the parallel is absorbing the degree polarization wave, and the vertical is absorbing the standing polarization wave.

Because there is enough disconnection, also can set up two pairs of vertical antennas with each other, the exercise is very convenient.

In order to stop the phase correlation more and more excellent, reduce the difficulty of mediation, where the folded vibrator plane is perpendicular to the beam.

As the length of the oscillator is about half wavelength, the oscillator midpoint is just located in the electric wave feel signal voltage zero point, in order to be the oscillator midpoint can use metal bolts and aluminum beam directly fixed, do not have to insulate, so that can also be convenient to discharge feel static electricity.

If the main oscillator recycling half-wave symmetric oscillator and the feed line are connected to the place must and beam to maintain excellent insulation, if the recycling half harm the combined oscillator, the midpoint is still connected to the beam.

The metal beam and the end of the electric field polarization bias perpendicular to the direction, so the radiation field of the antenna will not have a significant impact.

Another necessary attention is because the antenna is usually erected on the roof, balcony, and other outdoor situations, by the wind, sun, and rain after the joints easily oxidation rust, affecting the signal transmission and antenna matching so that access to the results becomes poor, need to use waterproof tape to deal with the reward in advance, and should also pay attention to lightning protection.

The LoRa Directional Antenna 10M Yagi Antenna is supplied by C&T RF Antennas Inc, the professional Yagi-Uda antenna and directional Yagi antenna manufacturer in China.

We provide the RF wireless antenna with many antenna types such as Through-hole Mount AntennasMagnetic Mount AntennasRubber Duck AntennasFiberglass AntennasPCB AntennasFPC AntennasSpring Coil AntennasSector AntennasYagi antennas, etc.

C&T RF Antennas Inc provides the indoor-outdoor antenna with many antenna frequencies such as Cellular6G5G4G3GNB-IoTGNSSGPSDual-band Wifi5.8 GHz2.4 GHz169MHz230MHz315MHz433MHz868MHz915MHz LoRaUWBRFIDADS-B, etc.

Contact us for more LoRa Directional Antenna 10M Yagi Antenna details such as the LoRa Directional Antenna 10M Yagi Antenna datasheet, LoRa Directional Antenna 10M Yagi Antenna pricing, and LoRa Directional Antenna 10M Yagi Antenna inventory, or other Yagi antenna styles.

LoRa Directional Antenna 10M Yagi Antenna Specifications

LoRa Directional Antenna 10M Yagi Antenna Electrical Specifications

RF Antenna TypeYagi Antenna
ModelCTRF-ANTENNA-YAGI-8096-5819-NK-10M
Frequency800-960 MHz
Gain11dBi
VSWR≤1.8
Impedance50 Ω
PolarizationVertical
Cable TypeRG50-3
ConnectorN-Type Female
Cable Length10Meters
Max Power100W
Lightning ProtectionDC-Ground

LoRa Directional Antenna 10M Yagi Antenna Mechanical Specifications

Dimension580x185mm
WeightApprox. 1200g
MaterialAluminum/SUS304
Operation Temperature-40˚C~+85˚C
Storage Temperature-40˚C~+80˚C
Element9
MountingU Clamp/Adsorption
Safety Emission and otherRoHS Compliant
ApplicationsLoRa/GSM/ISM/IoT/M2M, etc.


Lora Directional Antenna Yagi Antenna Features

C&T RF Antennas Inc - Outdoor Directional Antenna Yagi-Uda Antenna
C&T RF Antennas Inc – Outdoor Directional Antenna Yagi-Uda Antenna

 

Outdoor Antenna Directional Yagi Antenna Mounting - C&T RF Antennas Inc
Outdoor Antenna Directional Yagi Antenna Mounting – C&T RF Antennas Inc

 

C&T RF Antennas Inc - Outdoor Directional Antenna 7-element Yagi Uda Antenna Features
C&T RF Antennas Inc – Outdoor Directional Antenna 7-element Yagi Uda Antenna Features

 

Other Yagi-Uda Antenna Styles

Directional Antennas Outdoor Yagi Antennas - C&T RF Antennas Inc
Directional Antennas Outdoor Yagi Antennas – C&T RF Antennas Inc

Reviews

There are no reviews yet.

Be the first to review “LoRa Directional Antenna 10M Yagi Antenna”