Embedded Antenna 4G LTE Antenna Design

Who Provides The Embedded Antenna 4G LTE Antenna Design Service?

C&T RF Antennas Inc supplies the FPC/PCB antenna Embedded Antenna 4G LTE Antenna Design, with the embedded PCB antenna 4G LTE antenna design, embedded FPC 4G antenna LTE antenna design, etc.

The LTE Antenna Design for the ISM/SCADA/Utilities, IoT/NB-IoT/LoRa, 2G/3G/4G/LTE/LTE-IoT, LTE-M, GSM, GPRS, UMTS applications.

C&T RF Antennas Inc also provides the PCB antenna 4G PCB antenna design, FPC antenna 2.4 GHz Antenna Design, Spring Coil antenna Helical Antenna Design, 433MHz Whip Antenna Design, etc.

The Embedded Antenna 4G LTE Antenna Design Service is provided by C&T RF Antennas Inc, the RF antenna manufacturer in China, we provide many antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antenna, Yagi Antenna, etc.

C&T RF Antennas Inc provides the RF antenna with many antenna frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.

C&T RF Antennas Inc provides RF wireless antennas for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.

Contact the C&T RF team for more Embedded Antenna 4G LTE Antenna Design details.

Embedded Antenna 4G LTE Antenna Design Specifications

Embedded Antenna 4G LTE Antenna Design Solution

In order to be universal, smartphones or tablets must be able to work under various frequency bands and protocols. Of course, it is not required to work in all frequency bands and protocols at the same time, so an antenna system that can be adjusted to the target operating frequency band can be developed.

This state-tuned antenna can be called a smart antenna or adaptive antenna. Its basic principle is to limit the instantaneous operating frequency to one or two narrowband frequency bands of interest to meet the protocol requirements of a specific area.

In this way, the requirements for broadband operation are reduced, allowing the antenna to be installed in a more compact space without sacrificing radiation efficiency.

There are two basic methods for antenna tuning: feed point matching and aperture tuning. However, there are many factors that affect the implementation decisions of these methods, and there is no single solution that can be suitable for each application.

LTE Antenna Feed Point Matching

Feed point matching can be used in many antenna implementations, whether tunable or non-tunable. The main function of the matching circuit is to match the antenna terminal impedance with the impedance of the rest of the radio system (usually 500) under a wide range of working conditions.

A typical tunable matching implementation uses parallel or series variable capacitors as part of the impedance matching circuit. Adjusting the capacitance of the capacitor can change the resonant frequency of the target circuit.

To compress and tune the range according to the required antenna size, a larger range of capacity changes is generally required to achieve frequency shift, so multiple tuning elements and/or a wide range of tuning values ​​are usually required.

Below are the existing Embedded PCB Antenna 4G LTE Antenna Design styles.

Embedded PCB Antenna Size 36x5mm PCB Wifi Antenna

Embedded PCB Antenna Size 34x9mm 4G PCB Antenna

Embedded PCB Antenna Size 35x6mm LTE PCB Antenna

Embedded PCB Antenna Size 35x8mm 4G LTE PCB Antenna

Embedded PCB Antenna Size 59x8mm PCB LTE Antenna

Embedded PCB Antenna Size 65x12mm LTE Antenna PCB

Embedded PCB Antenna Size 40x40mm 4G Diversity Antenna

Embedded PCB Antenna Size 75x5mm GSM PCB Antenna

Embedded PCB Antenna Size 75x22mm 4G LTE Diversity Antenna

Embedded PCB Antenna Size 95x13mm 4G LTE Antenni

Embedded PCB Antenna Size 98x13mm 4G LTE Antenne

Embedded PCB Antenna Size 105x14mm-B 4G 2300 MHz Antenna

Embedded PCB Antenna Size 105x14mm-G LTE 1800 Antenna

Embedded PCB Antenna Size 125x14mm 2300 MHz LTE Antenna

Embedded PCB Antenna Size 135x8mm Indoor LTE Antenna

Embedded PCB Antenna Size 145x12mm 3G PCB Antenna

Below are the existing 4G LTE antenna design flexible PCB antenna styles.

Flexible PCB board size 57x23mm Embedded FPC 4G Antenna

Flexible PCB board size 70x18mm Embedded FPC 4G LTE Antenna

Flexible PCB board size 50x60mm Internal FPC 3G 4G Antenna

Flexible PCB board size 32x7mm LTE Indoor Antenna

Flexible PCB board size 32x8mm 4G Antenna Indoor

Flexible PCB board size 38x16mm Indoor 4G Antenna

Flexible PCB board size 40x15mm 4G Internal Antenna

Flexible PCB board size 40x15mm 4G LTE Indoor Antenna

Flexible PCB board size 82x21mm Best Indoor 4G Antenna

Flexible PCB board size 59x68mm Best Internal 4G Antenna

Flexible PCB board size 43x38mm 4G LTE Internal Antenna

Flexible PCB board size 52x24mm Internal 4G Antenna

Flexible PCB board size 52x24mm 4G Router Internal Antenna

Flexible PCB board size 70x22mm Beste 4G Antenne

Flexible PCB board size 95x24mm Best LTE Antenna

Flexible PCB board size 60x8mm 3G 4G Antenne

Flexible PCB board size 70x18mm LTE 4G Antenne

Contact the C&T RF team for more 4G LTE antenna design details.

Flex PCB Antenna Features

Flex PCB Antenna Usages