No.51 of Xida Rd

Changan, Dongguan, 523863

+86 134 1223 9096

24/7 Customer Support

Mon - Sat: 9:00 - 18:30

Online support always open

This product is Amazing

High-performance 4dBi Omni NB-IoT Antenna

20x250mm Omni NB-IoT Antenna Omni Antenna 4G Omni LTE Antenna C&T RF Antennas Inc

Omni NB-IoT Antenna Manufacturer

C&T RF Antennas Inc is a High-performance 4dBi NB-IoT Antenna Manufacturer, we provide NarrowBand IoT/NB-IoT antennas with many antenna types.

Contact the C&T RF sales team for more High-performance 4dBi Omni NB-IoT Antenna details.

What is a High-performance 4dBi Omni NB-IoT Antenna?

The High-performance 4dBi Omni NB-IoT Antenna CTRF-ANTENNA-FB-8221-20250-NM is a 4dBi Omnidirectional fiberglass Antenna NB-IoT antenna manufactured by C&T RF Antennas Inc for NB-IoT, LTE Cat M outdoor applications.

The outdoor omnidirectional NB-IoT antenna comes with a 20x250mm waterproof & UV-proof fiberglass antenna mast, N male connector, 360-degree signal transmitting and receiving antenna for LTE, LTE Cat, LTE M, GSM, Lora, 2G, 3G, NB-IoT bands.

NB-IoT allows for extended coverage in both outdoor and deep indoor environments and improves device power consumption, system capacity, and spectral efficiency.

NB-IoT has three operational modes, one is independent of the operator’s network outside red; the second is on the LTE protection tape, its main principle is to use OFDMA, and before and after reserving 10kHz protection With two sub-carrier spacing, one is 3.75 kHz, the other is to interval 15KHz; the third is in-band mode: any resource block in the middle of the LTE carrier.

The High-performance 4dBi Omni NB-IoT Antenna is manufactured by C&T RF Antennas Inc, the NB-IoT internal antennas & NB-IoT external antennas manufacturer in China.

C&T RF Antennas Inc provides different NB-IoT antenna types such as Through-hole Mount AntennasMagnetic Mount AntennasRubber Duck AntennasFiberglass AntennasPCB AntennasFPC AntennasSpring Coil AntennasSector AntennasYagi antennas, etc.

C&T RF Antennas Inc provides the internal-external antenna with many radio frequency bands such as Cellular6G5G4G3GNB-IoTGNSSGPSDual-band Wifi5.8 GHz2.4 GHz169MHz230MHz315MHz433MHz868MHz915MHz LoRaUWBRFIDADS-B, etc.

C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas such as 3in1 combination antennas 4G/GPS/Wifi antennas, 2in1 4G/GPS antennasGSM/GPS antennas4G/Wifi antennasGPS/Wifi antennas, etc. for Wi-Fi And BluetoothGPS And GNSSLoRa And ISMIoT, And M2M applications.

The High-performance 4dBi Omni NB-IoT Antenna is available at C&T RF Antennas Inc. C&T RF Antennas Inc offers High-performance 4dBi Omni NB-IoT Antenna inventory, High-performance 4dBi Omni NB-IoT Antenna pricing, & datasheets for High-performance 4dBi Omni NB-IoT Antenna.

High-performance 4dBi Omni NB-IoT Antenna Specifications

High-performance 4dBi Omni NB-IoT Antenna Electrical Specifications

RF Antenna TypeOmni Fiberglass Antenna
ModelCTRF-ANTENNA-FB-8221-20250-NM
Frequency Range824-960MHz; 1710-2170MHz
Gain4dBi
VSWR≤2.0
Impedance50 Ω
PolarizationVertical
DirectionalOmni-directional
ConnectorN-type Male
Max Power50W
Lightning ProtectionDC-Ground

High-performance 4dBi Omni NB-IoT Antenna Mechanical Specifications

Dimension20*250mm
WeightApprox. 200g
Radome MaterialFiberglass
Operation Temperature-20˚C ~ +85˚C
Storage Temperature-40˚C ~ +85˚C
ColorGrey
Antenna DesignDipole Array
MountingScrew
Safety Emission and otherRoHS Compliant
ApplicationsISM/SCADA/Utilities, IoT/NB-IoT/LoRa, LTE-M/Cat-M, 2G/3G/GSM

NB-IoT is considered a key and fast-growing technology for low-power IoT applications and has been widely adopted in China and some other regions of the world. LTE-M, on the other hand, is more popular in Japan, Australia, North America, and parts of Europe. However, many regions and operators tend to use 4G Cat 1 and Cat 1 bis for some mature and some new IoT applications.

With the introduction of 5G, many advanced IoT applications such as automotive, router CPE, and PC will move from advanced 4G technology to 5G. In addition, the advent of 5G Redcap will also replace some legacy technologies such as 3G/4G in some IoT applications.

As a result, there are a large number of cellular access technology solutions available across the IoT ecosystem, depending on the application, data requirements, cost constraints, and operator dynamics in a given market.

 

High-performance 4dBi Omni NB-IoT Antenna Fiberglass antenna features 

Fiberglass Antenna Features
Fiberglass Antenna Features – C&T RF Antennas Inc
Omnidirectional Antenna Fiberglass Antenna Features
Omnidirectional Antenna Fiberglass Antenna Features – C&T RF Antennas Inc
Fiberglass Antenna Mounting Methods
Fiberglass Antenna Mounting Methods – C&T RF Antennas Inc

 

High-gain Omnidirectional Antenna Fiberglass Antennas
High-gain Omnidirectional Antenna Fiberglass Antennas – C&T RF Antennas Inc

 

High-performance 4dBi Omni NB-IoT Antenna applications

Omnidirectional Antenna Fiberglass Antenna Applications
Omnidirectional Antenna Fiberglass Antenna Applications – C&T RF Antennas Inc

Reviews

There are no reviews yet.

Be the first to review “High-performance 4dBi Omni NB-IoT Antenna”