What is High-performance 4G PCB LTE Antenna?
The High-performance 4G PCB LTE Antenna CTRF-ANTENNA-PCB-7027-5908-IPEX antenna is an Internal multiband LTE PCB antenna with support for LTE/UMTS/GSM/WiFi bands including DCS, PCS, ISM, GPRS, and AMPS. U.FL connector with 10cm cable extension PCB antenna manufactured by C&T RF Antennas Inc.
The High-performance 4G PCB LTE Antenna is a Multiband 4G and LTE Internal PCB Antenna ideal for integrating to LTE and 4G terminals gateways and devices.
PCB antenna products features:
C&T RF Antennas Inc’s PCB antenna products can deal with complex and varied applications in terms of quality, life, reliability, etc.
The bulti-in antenna PCB antenna LTE antenna is supplied by C&T RF Antennas Inc, a leading embedded PCB antenna and FPC antenna manufacturer in China. We also have more other PCB antenna 4G LTE Antenna styles for your best choice.
IoT devices and sensors are often housed in ruggedized enclosures to protect them from wind, precipitation, ultraviolet light, humidity, salt water, and other environmental factors elements such as wind, precipitation, UV, humidity, and salt water.
NEMA-rated and/or IP-rated enclosures may be used: however, these enclosures do not take into account the effect of individual components on the antenna’s radiation pattern.
However, these enclosures do not take into account the effect of individual components on the directional map of the antenna.
Even molded plastic housings can cause RF loss and should be tested and qualified prior to manufacturing.
Polycarbonate housings will obviously exhibit different signal loss characteristics than thermoplastic housings and stainless steel housings.
Solder pads, pins, rails, and grounding elements Metal components such as solder pads, pins, rails, and grounding elements will result in reduced antenna efficiency, gain, and bandwidth, while metal housing components such as brackets, padlocks, screws/studs, and even external rod mounting kits will cause signal attenuation. metal housing components can cause signal attenuation.
We provide many antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antenna, Yagi Antenna, etc.
C&T RF Antennas Inc provides the RF antenna with many antenna frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.
C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.
Contact us for more details on the High-performance 4G PCB LTE Antenna such as High-performance 4G PCB LTE Antenna datasheet, High-performance 4G PCB LTE Antenna pricing, High-performance 4G PCB LTE Antenna inventory, and other LTE antenna types.
Embedded Antenna High-performance 4G PCB LTE Antenna Specifications
High-performance 4G PCB LTE Antenna Electrical Specifications | |
RF Antenna Type | PCB Antenna |
Model | CTRF-ANTENNA-PCB-7027-5908-IPEX |
Frequency | 698-960MHz, 1710-2700MHz |
Gain | 2dBi/5dBi |
VSWR | ≤2.0 |
Impedance | 50 Ω |
Polarization | Vertical |
Connector | U.FL/IPEX/IPX |
Lightning Protection | DC-Ground |
High-performance 4G PCB LTE Antenna Mechanical Specifications | |
PCB Board Dimension | 59*8mm |
Weight | Approx. 3g |
Material | PCB Board |
Operation Temperature | -40˚C ~ +85˚C |
Storage Temperature | -40˚C ~ +80˚C |
Color | Green |
Antenna Design | Dipole Antenna |
Mounting | Screw/Sticker |
Safety Emission and other | RoHS Compliant |
Applications | ISM/SCADA/Utilities, IoT/M2M/NB-IoT/LoRa, 2G 3G 4G LTE/LTE-IoT, GSM GPRS UMTS, etc. |
High-performance 4G LTE PCB antenna design features
Reviews
There are no reviews yet.