High Gain 5G Sub-6GHz Flex PCB Antenna

What is a High Gain 5G Sub-6GHz Flex PCB Antenna?

The High Gain 5G Sub-6GHz Flex PCB Antenna CTRF-ANTENNA-FPC-60600-9414-IPEX antenna is an 8dBi Omni high-gain 5G NR Sub 6GHz 600-6000MHz wideband frequency flexible PCB antenna 5G NR antenna manufactured by C&T RF Antennas Inc for 5G NR Sub-6GHz applications.

The High Gain 5G Sub 6GHz Flex PCB Antenna comes with a 94x14mm FPC size, 120mm cable extension, and Ipex/u.FL connector, 8 dBi high-gain & high-performance new 5G antenna.

What is the 5G Access Network (NG-RAN)?

The 5G access network contains the following two main nodes.

1. gNB: provides user-plane and control-plane protocols and functions for NR to users of 5G networks.

2. ng-eNB: provides user plane and control plane protocols and functions for NR to users of 4G networks.

The interfaces between gNB and gNB, between gNB and ng-eNB, and between ng-eNB and gNB are all Xn interfaces.

The main functions of the gNB and ng-eNB are as follows.

1. functions related to wireless resource management: wireless bearer control, wireless access control, connection mobility control, dynamic resource allocation (scheduling) of UEs in uplink and downlink

2. IP header compression, encryption, and integrity protection of data

3. Selecting the AMF route for the UE at the time of attachment if the information provided by the user cannot determine the route to the AFM;

4. Routing of user plane data to the UPF

5. Provide routing of control plane information to the AMF

6. Connection setup and release

7. Scheduling and transmission of paging messages

8. Scheduling and transmission of broadcast messages

9. Measurement and measurement report configuration for mobility and scheduling

10. Transport level packet marking in the uplink;

11. Session management

12. QoS traffic management and mapping of wireless data bearers

13. Support for UEs in the RRC_INACTIVE state

14. NAS message distribution function

15. Wireless access network sharing

16. Dual connection

17. Support the connection between NR and E-UTRA

The 5G NR Antenna High Gain 5G Sub-6GHz Flex PCB Antenna is manufactured by C&T RF Antennas Inc, the 5G NR antenna manufacturer and New 5G antenna supplier in China.

C&T RF Antennas Inc provides many antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antennas, Yagi antennas, etc.

C&T RF Antennas Inc provides the internal-external antenna with many radio frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.

C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas such as 3in1 combination antennas 4G/GPS/Wifi antennas, 2in1 4G/GPS antennas, GSM/GPS antennas, 4G/Wifi antennas, GPS/Wifi antennas, etc. for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.

Contact us for more details on the High Gain 5G Sub-6GHz Flex PCB Antenna such as High Gain 5G Sub-6GHz Flex PCB Antenna datasheet, High Gain 5G Sub-6GHz Flex PCB Antenna pricing, High Gain 5G Sub-6GHz Flex PCB Antenna inventory, etc. Or the other 5G NR antenna types.

High Gain 5G Sub-6GHz Flex PCB Antenna Specifications

High Gain 5G Sub-6GHz Flex PCB/FPC antenna features