What is a 915MHz Fiberglass Antenna Lora Node Antenna?
The 915MHz Fiberglass Antenna Lora Node Antenna CTRF-ANTENNA-FB-0915-20260-N-5DBI is a Lora fiberglass outdoor antenna 5dBi high-gain antenna 915Mhz omnidirectional Lora antenna manufactured by C&T RF Antennas Inc for indoor-outdoor Lora Node and Gateway networks.
The 915MHz Fiberglass Antenna Lora Node Antenna also can be an N-type female connector for your selection.
Besides the 915MHz Fiberglass Antenna Lora Node Antenna, this type of antenna also has a EU868 MHz antenna frequency, or 850-930 MHz Lora radiofrequency antenna for your best choice.
What are the steps for fault detection when two SX127x modules from different manufacturers cannot communicate with each other?
First, the frequency shift caused by the crystal is checked between the two devices.
The bandwidth (BW), center frequency, and data rate all originate from the crystal frequency. Second, check the software/firmware settings on both sides to ensure that the frequency, bandwidth, spreading factor, encoding rate, and packet structure are the same.
Is LoRa a mesh network, a peer-to-peer pass, or a network?
LoRa itself is a PHY that can be used in all network topologies. mesh networks extend the range of the network, but at the cost of reduced network capacity, synchronization overhead, and reduced battery life due to synchronization and hop count.
LoRa gateways and modules are networked in a star network, while LoRa modules can theoretically be networked in a point-to-point polling fashion, although point-to-point polling is far more efficient. The efficiency of point-to-point polling is much lower than that of the star network.
As the link budget and distance range of LoRa increases, there is no need to extend the distance with mesh network architecture, so LoRaWAN chooses star architecture to optimize network capacity, battery life, and easy installation.
The 915MHz Fiberglass Antenna Lora Node Antenna 5dBi is manufactured by C&T RF Antennas Inc, the Lora internal antennas & Lora external antennas manufacturer in China.
C&T RF Antennas Inc provides the 15dBi Lora antenna, 11dBi Lora Antenna, 12dBi Lora antenna, 20dBi Lora antenna, 10dBi Lora antenna, 9dBi Lora antenna, 8dBi Lora antenna, 6dBi Lora antenna, 5.8dBi Lora antenna, 5dBi Lora antenna, 4dBi Lora antenna, 3dBi Glass Fiber Lora Antenna, 3dBi Lora antenna, 2.5dBi Lora antenna, 2dBi Lora antenna, etc.
C&T RF Antennas Inc provides Lora antennas with other antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Antennas, etc.
The 915MHz Fiberglass Antenna Lora Node Antenna 5dBi is available at C&T RF Antennas Inc. C&T RF Antennas Inc offers a 915MHz Fiberglass Antenna inventory, 915MHz Fiberglass Antenna pricing, 915MHz Fiberglass Antenna datasheets or the other Lora antenna types.
915MHz Fiberglass Antenna Lora Node Antenna Specifications
915MHz Fiberglass Antenna Lora Node Antenna Electrical Specifications | |
| RF Antenna Type | Omni Fiberglass Antenna |
| Model | CTRF-ANTENNA-FB-0915-20260-N-5DBI |
| Frequency Center | 915 MHz |
| Gain | 5 dBi |
| VSWR | ≤1.8 |
| Impedance | 50 Ω |
| Polarization | Vertical |
| Directional | Omni-directional |
| Connector | N-type Male |
| Max Power | 50W |
| Lightning Protection | DC-Ground |
915MHz Fiberglass Antenna Lora Node Antenna Mechanical Specifications | |
| Dimension | 20*260mm |
| Weight | Approx. 220g |
| Radome Material | Fiberglass |
| Operation Temperature | -20˚C ~ +85˚C |
| Storage Temperature | -40˚C ~ +85˚C |
| Color | Grey |
| Antenna Design | Dipole Array |
| Mounting | Screw |
| Safety Emission and other | RoHS Compliant |
| Applications | Public Safety/LMR/P25/TETRA, ISM/SCADA/Utilities, RFID, IoT/NB-IoT/LoRa |
Fiberglass antenna features and applications
How do you mount a LoRa antenna?
Reviews
There are no reviews yet.