What is a High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna?
The High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna CTRF-ANTENNA-PCB-8221-3208-UFL antenna is an indoor antenna NB-IoT PCB antenna designed Ipex/u.FL antenna manufactured by C&T RF Antennas Inc for LTE Cat-M1 & LTE Cat-NB1 applications.
The High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna has an 824-960MHz, 1710-2170MHz covering GSM LTE Cat M1 & NB-IoT band for IoT devices.
The High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna comes with a small PCB size of 32x8mm, normal 2dBi gain, Ipex connector, and 100mm length RG 1.13 cable for LTE connectivity, the LTE CAT M1, and LTE Cat-NB1.
What is the relationship between LTE Cat-M1 and LTE Cat-NB1?
While 5G mobile technology is expected to play an important role in IoT applications, two narrowband LTE technology standards, LTE Cat-M1 (machine-type communication) and the 3GPP Release 13 standard for LTE Cat-NB1, will become the dominant technology for IoT applications.
LTE Cat-M1 technology uses 1.4MHz bandwidth and is widely used for Internet connectivity for IoT applications, including voice communication, with a maximum data rate of 1Mbps.
LTE Cat-NB1, also known as NB-IoT, requires a bandwidth of approximately 200KHz and mainly transmits low-traffic data at rates below 100Kbps.
LTE is one of the candidate technologies for IoT applications. However, the adoption and widespread use of candidate technologies depend on their technical compatibility and a high degree of technical standardization. In this regard, LTE has a unique advantage due to its support by 3GPP.
C&T RF Antennas Inc, the NB-IoT Internal Antenna & NB-IoT External Antenna manufacturer in China, manufactures the High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna.
C&T RF Antennas Inc provides antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antennas, Yagi antennas, etc.
C&T RF Antennas Inc provides the internal-external antenna with many radio frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.
C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.
Contact us for details on the High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna, such as the internal PCB NB-IoT antenna datasheet, internal PCB NB-IoT antenna pricing, internal PCB NB-IoT antenna inventory, etc.
Or the other internal & external NB-IoT antenna types.
High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna Specifications
High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna Electrical Specifications | |
RF Antenna Type | Built-in PCB Antenna |
Model | CTRF-ANTENNA-PCB-8221-3208-UFL |
Frequency Range | 824-960MHz; 1710-2170MHz |
Gain | 2±1dBi |
Radiation Pattern | Omnidirectional |
VSWR | ≤2.0 |
Impedance | 50 Ω |
Polarization | Vertical Polarization |
Cable Type | RG1.13 |
Cable Length | 100mm |
Connector | U.FL/IPEX |
Lightning Protection | DC-Ground |
High-performance 2dBi LTE Cat NB1 Small PCB NB-IoT Antenna Mechanical Specifications | |
PCB Board Dimension | 32*8mm |
Weight | Approx. 3g |
Material | PCB |
Operation Temperature | -40˚C ~ +85˚C |
Storage Temperature | -40˚C ~ +80˚C |
Color | Green |
Antenna Design | Dipole Array |
Connector Pull Test | >= 1 Kg |
SafetyEmission and other | RoHS Compliant |
Applications | ISM/SCADA/Utilities, IoT/NB-IoT/LoRa, LTE-M/Cat-M, 2G/3G/GSM |
Reviews
There are no reviews yet.