What is an Omnidirectional NB-IoT Antenna LTE Cellular Antenna?
The Omnidirectional NB-IoT Antenna LTE Cellular Antenna CTRF-ANTENNA-FB-8221-20300-NM is a 5dBi high-gain NB-IoT antenna omnidirectional fiberglass Antenna NB-IoT antenna LTE cellular antenna manufactured by C&T RF Antennas Inc for LTE, LTE-M, NB-IoT applications.
The NB-IoT /CAT M1 Antenna Omnidirectional NB-IoT Antenna LTE Cellular Antenna delivers stable high gain 5dBi, omnidirectional 360-degree, and high efficiencies to support NB-IoT / CAT M1 applications.
5 features of NB-IoT technology:
1. Wide coverage
NB-IoT technology enables coverage gain over GSM good 20dB, covering the coverage area is extended, and underground garages, the underground pipe can be covered.
Urgent tool spectral density gain 17dB (200MW / 3.75kHz of Nb-IoT) 2G / 3G / LTE 200MW / 180KHz)
2-16 times retransmission mechanism gain 3-12dB (pay the time quotation, 10s, but business allowed)
Compiling code gain 3-4dBi
2. Big connection
The NB-IoT single sector supports 50,000 connections, 50 times higher (2G / 3G / 4G is 14/128/1200), and there are about 5 million physical sites worldwide, assuming full-service NB-IoT, The number of Internet access terminals that can be accessed per station will reach 450 billion.
Narrowband Technology: Upstream Equivalent Power 36 Channel * 23DBM, Enhance Channel Capacity
Reduce the overhead of the empty mouth command to increase spectrum efficiency
Base station optimization: independent access congestion control and terminal context information storage
Core Network Optimization: Terminal Context Storage and Downlink Data Cache
3. Low power consumption
The NB-IoT terminal is sent once a day, and a 200by battery standby time is 10 years.
Single-speed transmission time is shortened
Terminal 99% of work works in energy-saving mode (PSM), this energy-saving mode and mobile phone energy-saving mode are different, and the terminal is still registered in the net, but the signaling is not reached.
The terminal is in-depth sleep, and 99% of the time terminal consumption is only 15-micron pads. Its sleep time is relatively long, which reduces the frequency of the terminal listening network.
Since the Internet of Things is not as fast as the mobile phone, the management of mobility can be simplified.
4. Low cost
Currently, the cost of a single module will not exceed $ 5, and the goal is to do about 1 US dollar.
180kHz narrowband, reducing the complexity of the chip;
Simplify the protocol stack (500byte) to reduce Flash / Ram in on the film;
5. Low sampling rate
Single antenna, half-duplex, low RF cost;
The peak is low, and the single-piece SOC has the effect of built-in 23DBM transmit power.
The Omnidirectional NB-IoT Antenna LTE Cellular Antenna is manufactured by C&T RF Antennas Inc, the NB-IoT internal antennas & NB-IoT external antennas manufacturer in China.
We provide narrowband IoT antennas with other antenna types such as Through-hole Mount Antennas, Magnetic Mount Antennas, Rubber Duck Antennas, Fiberglass Antennas, PCB Antennas, FPC Antennas, Spring Coil Antennas, Sector Antennas, Yagi antennas, etc.
C&T RF Antennas Inc provides the internal-external antenna with many radio frequency bands such as Cellular, 6G, 5G, 4G, 3G, NB-IoT, GNSS, GPS, Dual-band Wifi, 5.8 GHz, 2.4 GHz, 169MHz, 230MHz, 315MHz, 433MHz, 868MHz, 915MHz LoRa, UWB, RFID, ADS-B, etc.
C&T RF Antennas Inc provides single-band, dual-band, and multi-band antennas such as 3in1 combination antennas 4G/GPS/Wifi antennas, 2in1 4G/GPS antennas, GSM/GPS antennas, 4G/Wifi antennas, GPS/Wifi antennas, etc. for Wi-Fi And Bluetooth, GPS And GNSS, LoRa And ISM, IoT, And M2M applications.
The Omnidirectional NB-IoT Antenna LTE Cellular Antenna is available at C&T RF Antennas Inc.
C&T RF Antennas Inc offers Omnidirectional NB-IoT Antenna LTE Cellular Antenna inventory, Omnidirectional NB-IoT Antenna LTE Cellular Antenna pricing, & datasheets for Omnidirectional NB-IoT Antenna LTE Cellular Antenna.
Omnidirectional NB-IoT Antenna LTE Cellular Antenna Specifications
Omnidirectional NB-IoT Antenna LTE Cellular Antenna Electrical Specifications | |
RF Antenna Type | Omni Fiberglass Antenna |
Model | CTRF-ANTENNA-FB-8221-20300-NM |
Frequency Range | 824-960MHz; 1710-2170MHz |
Gain | 5dBi |
VSWR | ≤2.0 |
Impedance | 50 Ω |
Polarization | Vertical |
Directional | Omni-directional |
Connector | N-type Male |
Max Power | 50W |
Lightning Protection | DC-Ground |
Omnidirectional NB-IoT Antenna LTE Cellular Antenna Mechanical Specifications | |
Dimension | 20*300mm |
Weight | Approx. 250g |
Radome Material | Fiberglass |
Operation Temperature | -20˚C ~ +85˚C |
Storage Temperature | -40˚C ~ +85˚C |
Color | Grey |
Antenna Design | Dipole Array |
Mounting | Screw |
Safety Emission and other | RoHS Compliant |
Applications | ISM/SCADA/Utilities, IoT/NB-IoT/LoRa, LTE-M/Cat-M, 2G/3G/GSM |
Omnidirectional NB-IoT Antenna LTE Cellular Antenna Fiberglass antenna features
Omnidirectional NB-IoT Antenna LTE Cellular Antenna applications
Reviews
There are no reviews yet.